NF-611 HDMI Cable Tester

Features:

1. Fast and accurate verification with type A – A, A – C and C – C connectors.

2. Check miswires, short, open and cross status of HDMI cables.

3. Mapping continuity and proper configuration.

4. Displays 19 pin-to-pin and shield connection status on both main and remote unit.

5. Adjustable test modes:Fast/slow scan/manual test for step by step.

6. Design with loopback function.

Attention:

1.Don’t connected high voltage lines to avoid buring out the machine.

2.Put into the right place to avoid hurting others,because of the sharp part.

3.Connected the cable to the right port.

4.Read the user manual before use it.

Cables versions support	HDMI cables with type A & C connectors conforming to 1.0,1.1,1.2,1..2a, 1.3,1.3a,1.3b,1.4,1.4a,Category 1 and category 2 HDMI cables
Support test	19 pin to pin wiremap and shielding detection
Test interface of master unit	HDMI ( type A) x1, Mini HDMI (type A ) x1
Test mode	Fast / slow scan / step by step
Test distance	Under 50 meters
Status Display	19 leds and shield led on both master and remote unit
Beeper indication	Yes
Low battery indication	6.0V
Power source	DC 9V (NEAD 1604/ 6F22) x1 (not included)
Environment	Operating:0 to 40 < 80% RH Storage:-10 to 50 <70%RH
Dimensions	Master unit:103x66x27mm Remote unit:103x35x27mm

Produk