- +62 858-7630-0414
- admmultisado@gmail.com
Menu
The fabric flexing and abrasion tester is designed to evaluate the flexing resistance and rubbing resistance of materials such as polyurethane.
A loading plate applies force to the specimen, resulting in rubbing that causes damage. The resistance of coating to shear flexing and rubbing is then assessed. Suitable for materials with raised surfaces and rough substrates with thin polyurethane coatings.
Without the use of a loading plate, rubbing is generated by direct contact between specimen surfaces. The resistance of coating to shear flexing and rubbing is then assessed after a specified number of cycles.
Applicable to various materials, especially those with special surface characteristics such as polyurethane, for rubbing resistance evaluation.
The specimen is subjected to continuous flexing during testing, simulating real-use conditions.
Evaluate the resistance of specimen to wear and deformation through visual inspection.
It can simulate the continuous bending of materials in actual use, subjecting the sample to gentle friction, which is more in line with real-world usage conditions.
It offers two testing methods: pressure method and no-pressure method, to accommodate the characteristics of different materials, such as materials with a corrosive surface or materials with a thin layer coated on a rough surface.
It features an intuitive and easy-to-use interface, reducing user learning time and improving efficiency.
| Test station | 1 |
| Grip spacing | 12±0.3 mm |
| Loading plate | 5N±0.1N / 10N±0.2N |
| Rubbing distance | 40±1mm |
| Test speed | 120-180 cpm (2～3Hz) |
| Dimensions (W×D×H) | 400×530×307mm (W×D×H) |
| Power | 1∮, AC 220V, 50Hz |
Villa Payung Indah B 27, Jawa Tengah, Pudakpayung, Kec. Banyumanik, Kota Semarang, Jawa Tengah 50265
Copyright 2023 Amtast Multisado
