GOTECH Automatic Rubber Hardness and Density Tester (GT-7190-HD)

Description

Principle

The GT-7190-HD is specifically designed to measure both the hardness and the density of vulcanized rubber. It automatically presses an indenter into the material at three points to a specified depth, measuring the required forces, and performs hydrostatic density measurement using an electronic density balance.

Wide applicability:

Well-suited for rubber products across various industries, including automotive (e.g., rubber sealing components), electronics (e.g., rubber insulating components), home appliances (e.g., rubber gaskets), materials research, and general industrial manufacturing.

Automatic testing process:

Conducts automatic three-points hardness and hydrostatic density measurements, with a robotic arm for sample pickup and a rotating specimen tray, enabling automatic operation and increasing testing efficiency.

Dual testing modules:

Integrated with Shore durometer (A or D) and density measuring modules, the tester performs hardness and density tests simultaneously, providing precise and valuable data on rubber properties.

High-precision measurements:

The durometer provides digital displacement measurement and performs a fixed 3-seconds force hold for consistent results, while the density testing module features automatic water control and temperature monitoring to minimize thermal influence on the data.

Advanced data processing:

Equipped with an intuitive touchscreen and dedicated testing software, the tester provides real-time data monitoring, graphing, and one-click report export (including average hardness, density value, and temperature data). It also supports Excel format for easier quality control data analysis.

Standard conformity:

The density measurement complies with ISO 2781-2018 and GB/T 533-2008, while the hardness measurement conforms to ASTM D2240 and ISO 868, ensuring reliable and standardized results.

 

Feature

Simultaneous testing

Integrated with hardness and density measuring modules, the tester allows two rubber properties to be measured simultaneously, significantly reducing testing time.

Automatic operation

Features a rotating specimen tray with a capacity of 20 specimens and a robotic arm for sample pickup, minimizing human involvement significantly.

High-precision

Delivers high measurement repeatability, with 0.1 unit hardness and 0.0001g density resolution, ensuring reliable and consistent results.

 

Specification

Control system Touchscreen + dedicated testing software
Test mode Shore hardness measurement, density measurement ※optional single-test mode available upon request
Specimen tray Rotating sample tray with a capacity of 20 specimens
Specimen size 30mm in diameter and 5mm thick
Hardness testing module Durometer type Shore A or Shore D (select one) ※other types available upon request
Display resolution 0.1 unit
Test points 3-points averaging
Test load Shore A: 1kg
Shore D: 5kg
Load application hold time 3sec
Density testing module Measuring range 0.0001 to 125g
Display resolution 0.0001g
Measurement method Electronic density balance (Archimedes’ principle)
Test fluid circulation Auto-circulation and constant water level
Temperature recording Environmental and test fluid temperatures
Testing process Automatic
Dimensions (approx.) 68×41×64.5cm (W×D×H)
Power 1∮ AC220V 50Hz (or specify)
X